PADDY STRAW PELLET MILL
The paddy straw pellet machine can process the crushed paddy straw into fuel pellets, which gives the straw more surplus value and can also alleviate the energy crisis in many countries.
PADDY STRAW PELLET MILL FOR SALE
The straw pellet machine is a pellet making equipment specially used for the production of straw fuel pellets. Compared with the standard models, its transmission reducer and ring die are specially designed to adapt to the fiber characteristics and fluidity of straw, so as to maximize the output.
Rice straw pellet machines are mainly used in major agricultural countries such as India and Pakistan. Rice straw pellets are mainly supplied to high-energy consumption factories such as power plants and cement plants that do not have particularly high calorific value requirements.
PADDY STRAW PELLET MILL TYPES
Ring die paddy straw pellet machine and flat die rice straw pellet machine can both be used to process rice straw, but the application plant is different. Ring die pellet mill is mainly used in large-scale rice straw pellet production line, with high output and long operation time. Flat die pellet machine has simple structure, easy operation and maintenance, and it is more suitable for small straw production line with output below 1 ton/hour.
RING DIE PADDY STRAW PELLET MILL
When ring-die paddy straw pellet mill is only used to produce paddy straw, we can achieve a single-machine output higher than using wood sawdust, which is a very good performance, because most of the pellet machines on the market now capacity lower 30% than the expected output when processing straw, and some are even only half of the expected output. This is because we designed and used a professional reducer for straw, special improvements have been made based on the high toughness, lightness and looseness of straw fibers.
- High output, electricity production cost per ton of pellets can be reduced by 50%
- Extremely low failure rate, can run stably and continuously for 24 hours, only need to stop once a week for maintenance.
- Perfect after-sales service system, 24-hour online service provides guidance worldwide.
FLAT DIE PADDY STRAW PELLET MILL
Flat die paddy straw pellet machine is mainly used by small pellet factories. Although it is a small machine, we designed it according to the design standards of heavy-duty pellet machines. Therefore, this machine is very friendly to small pellet factories that are just starting up. According to customers feedback, the machine has a stable output and can maintain stable operation of two shifts per day with low failure.
- Maintenance are extremely simple, and the only vulnerable parts are the flat die and the press roller shell, which are easy to replace.
- The small rice straw pellet machine has a high cost-effectiveness and is suitable for novice operators.
- We have realized the online and video-based after-sales service, saving customers a lot of installation and test run costs.
TECHNICAL PARAMETERS
| MODEL | MOTOR | CAPACITY | PELLET SIZE |
| TCZL250 | 15KW | 100-200KG/H | 1120x440x1060 |
| TCZL300 | 22KW | 200-400KG/H | 1280x560x1220 |
| TCZL400 | 37KW | 300-500KG/H | 1350x550x1320 |
| TCZL450 | 55KW | 600-800KG/H | 1620x690x1600 |
| TCZL550 | 55KW | 800-1000KG/H | 1700x690x1600 |
| TCZL560 | 90KW | 1000-1500KG/H | 6/8/10/12MM |
| TCZL650 | 110KW | 1200-1400KG/H | 6/8/10/12MM |
| TCZL560A | 132KW | 1500-2000KG/H | 6/8/10/12MM |
| TCZL700 | 160KW | 2000-2500KG/H | 6/8/10/12MM |
| TCZL850 | 220KW | 3000-3500KG/H | 6/8/10/12MM |
| TCZL850A | 250KW | 3500KG/H | 6/8/10/12MM |
| TCZL850B | 280KW | 4000KG/H | 6/8/10/12MM |
HOW TO PRODUCE HIGH QUALITY PADDY STRAW PELLET
At present, the largest market for using paddy straw to make pellets is in India. According to market research, they mainly face the following problems when using paddy straw:
- During the crushing process, the output of the crusher is low and the amount of dust is relatively large.
- When using the standard pellet machine to produce pellets, the output is too low.
- The ring die wears out quickly and has a short life.
Above are the most common problems. To produce high-quality paddy straw pellets, the following points need to be achieved
- The crusher uses wear-resistant hammers, which has better crushing performance and is conducive to increasing the pellet machine capacity.
- Use our paddy straw pellet machine, which has low energy consumption, high output, and greatly reduces electricity costs.
- Add a pre-treatment process for paddy straw to screen out the soil, and use more wear-resistant ring die and rollers to increase the service life of the mold.
If you are already using straw to produce pellets and have encountered the above problems, please contact us. We are willing to share more professional experience with you.
HOW TO CHOOSE THE BEST PADDY STRAW PELLET MILLS
- The reducer is a key component of the pellet machine. Check whether the reducer of the pellet machine is a hardened gear reducer. Many pellet machines only use ordinary gears, which have a short life. In addition, the reducer of the horizontal ring die pellet machine is prone to insufficient pressure and blockage of the pellet machine due to the high speed.
- The spindle and bearings design of the pellet machine is also very important, which will directly affect the stable operation of the pellet machine. At present, the spindle mainly has two types: split design and integrated design. We believe that the integrated design has better concentricity and more stable operation, but these cannot be seen from the appearance of the machine.
FREQUENTLY ASKED QUESTIONS
Can paddy straw pellets be profitable?
There is a market for making paddy straw pellets and it can be profitable, but several conditions must be met. First, the purchase cost of straws is low. Second, the output of the straw pellet machine cannot be low. The second point is the most important.
If I want to produce paddy straw pellets, what is the minimum investment cost?
Generally, the smallest straw pellet machine is 7.5 KW. If equipped with an 11KW straw crusher, the total cost will be about US$5,000-6,000. But this is generally only suitable for families or small farms.
Which is better when producing rice straw pellets, flat die type or ring die type?
Generally, if the paddy straw pellet mill output is less than 1,000 kilograms per hour, a flat-die pellet mill is used. If the output is higher than 1,000 kilograms per hour, then a ring-die pellet machine is better.
OTHER MACHINES FOR STRAW PELLET PRODUCTION
Get Quick And Professional Response
We've got a lot of experience in palm tree waste production plant in the past 20 years. You are welcome to contact us to discuss more details. For specific materials, we are willing to provide you with testing services.
- The best design & quality machines
- Quick reply within 2 hours
- Provide the best proposal within 24 hours.
- Free test run service for special raw materials
- Detailed case analysis, make you know market soonest.
